One morning, you wake up feeling colder than usual. You check your heater, and instead of the warm fuzzy air, you’re greeted with a chill enough to jolt you awake. Experiencing your HVAC blowing cold air is uncomfortable and concerning. Let’s understand the potential causes and solutions that can help restore warmth to your home.
Incorrect Thermostat Settings
Sometimes, the issue lies with the thermostat. It might have been set to “cool,” or the fan might be set to “on” instead of “auto,” which causes the system to blow cool air. You should ensure that the thermostat is set to “heat” mode and the fan to “auto” to allow the system to operate correctly.
Dirty or Clogged Air Filters
Air filters trap dust, debris, and other particles to maintain indoor air quality. Clogged filters can result in cold air circulation over time, limiting airflow and causing the system to overheat and shut off the burners. A straightforward yet efficient method of maintaining air filters is to replace them every one to three months.
Heat Pump in Defrost Mode
Heat pumps may enter a defrost cycle in colder climates to prevent ice buildup. When it enters this mode, the system temporarily blows cold air indoors. This is normal and should resolve within a few minutes. However, it becomes concerning if it persists longer than it should and will require professional attention at this rate.
Blocked or Dirty Outdoor Unit
Every HVAC system has an external unit that needs unobstructed airflow to function correctly. Debris, snow, or dirt can hinder its performance, leading to cold air output. To maintain efficiency, ensure at least two to three feet of clearance around the unit and keep it clean.
Pilot Light Issues in Gas Furnaces
In gas furnaces, the burners are ignited by the pilot light. The system can’t produce heat if it’s out, resulting in cold air circulation. Relighting the pilot light per the manufacturer’s instructions can resolve this. If it persists to go out, consult a professional to check for underlying issues.
Malfunctioning Reversing Valve
The reversing valve in heat pump systems alternates between heating and cooling modes. If it malfunctions, the system might get stuck in cooling mode, blowing cold air. This issue requires professional diagnosis and repair.
3 Pro Tips to Maintain Warmth
-
- Plan yearly HVAC inspections to find and fix possible problems before they become serious ones.
- Look around your house’s windows, doors, and other openings for drafts. Sealing these can increase system efficiency and avoid heat loss.
- Consider adding a smart or programmed thermostat to control your house’s temperature.
Ready to Get Started?
By being aware of these possible problems and taking precautions, you can ensure your HVAC system runs well and keeps your house warm and cozy. If you need professional assistance, our team has you covered. Contact us today at Bounds Heating & Air in Gainesville, Florida for all your HVAC needs.
